Cloud & Infrastructure
A foundation that holds up as you grow.
Cloud environments, networks, connectivity and business communications, designed and built as one foundation, so the business on top of it can grow without starting over.
Sound Familiar?
Most infrastructure isn't designed. It accumulates.
That works until the business grows, moves or depends on something that fails.
Your infrastructure grew by accident
A server here, a second office there, a cloud subscription someone signed up for. It mostly works, but nobody has the whole picture.
The network can't keep up
Slow connections, dead spots and dropped calls cost time that nobody tracks, and the workarounds become the way things are done.
Moving to the cloud feels risky
You know some systems belong in the cloud, just not which ones, in what order, or how to move them without disrupting work.
Change would expose the gaps
Opening an office, relocating or losing a key system would show how much depends on setups nobody documented.
From Accumulated to Designed
Turn what you have into one foundation.
Most environments grew one decision at a time. We map what's there, decide what stays, moves or retires, and rebuild it as one design.
What you have today
- A server in a closet
- A patchwork network
- An aging phone system
- Scattered cloud apps
- Backups nobody has tested
How we rebuild it
- Map: What you run and why
- Decide: Keep, move or retire
- Build: In planned stages
- Run: Monitored and maintained
What you end up with
- Cloud environment
- Dependable network
- Unified communications
- Business continuity
What We Build and Look After
From the cloud down to the cabling.
One partner for the layers your business runs on, so they're planned to work together.
-
Cloud
Cloud environments designed around what you actually run, with identity, networking and recovery planned in, and moved there without disrupting the business.
- Cloud readiness assessment and architecture
- Cloud migration and deployment, planned around dependencies
- Managed cloud on AWS, Microsoft Azure and Google Cloud
- Compute, storage, databases and virtual networks
- Hybrid, private and public cloud
- Virtualization and virtual desktops
-
Network and servers
Dependable, segmented connections between your people, your places and your systems.
- Network design and implementation: LAN, WAN and Wi-Fi
- Routing, switching and network segmentation (VLANs)
- Firewalls, site-to-site VPN and secure remote access
- Internet connectivity planning, with failover and SD-WAN
- Network refresh and upgrades
- Server configuration, deployment and virtualization
-
Workplace infrastructure
The physical side of IT, planned and documented instead of improvised.
- Structured cabling, racks and patch panels
- Wireless access point placement
- Office IT setup, relocation and cutover planning
- Data center relocation and colocation
- Hardware procurement and lifecycle planning
- Network diagrams and technical documentation
-
Communications and continuity
Phones that move with your people, and a tested plan for the day something fails.
- VoIP and unified communications
- Microsoft Teams phones, call queues and conferencing
- Cloud and off-site backup
- Recovery testing and failover planning
- Recovery targets (RTO and RPO) agreed for each system
- Business continuity planning
Network Engineering
A network designed around how your business works.
Your network connects everything the business depends on: people, devices, applications, offices, cloud services and data. We treat it as an engineered system, designed and documented as a whole, rather than a collection of installed equipment.
-
Network architecture
A layout planned around your sites, people and applications, instead of equipment added as needs came up.
- LAN and WAN design
- Multi-location connectivity
- Routing and switching
- Network topology planning and diagrams
- SD-WAN where it fits
-
Secure connectivity
Connections are encrypted where they leave the building and limited to what each person or device needs.
- Site-to-site VPN between offices
- Secure remote access for staff
- Firewall configuration
- VLANs and network segmentation
- Separate staff and guest networks
-
Performance and availability
Enough coverage and capacity for a normal day, and a fallback for a bad one.
- Wireless coverage planning
- Capacity planning
- Quality of Service for voice and video
- Redundant connectivity and internet failover
-
Network management
A network stays dependable when its records are current and changes are planned.
- Network monitoring
- Configuration documentation
- Device lifecycle management
- Planned upgrades
- Troubleshooting and optimization
- Connect. Headquarters, the branch office, remote staff and cloud applications are joined into one planned network.
- Secure. Traffic between sites and from remote staff travels through encrypted VPN tunnels that end at the firewall.
- Segment. Staff devices, guest Wi-Fi and servers sit on separate VLANs, so a guest device has no route to business systems.
- Fail over. In a redundant setup, when the primary internet link drops, traffic moves to the second link.
- Run. The primary link is back, every path is labeled and documented, and the network is ready to be monitored.
Security by Design
Security belongs in the foundation.
Security added after the cloud and the network are built is expensive and full of gaps. We consider identity, networking, workload protection, data security and recovery while the foundation is being designed.
-
1. Identity and access
Access is designed first: who can sign in, from where, and to what.
- Multi-factor authentication and single sign-on
- Role-based, least-privilege access
- Conditional access policies
- Access reviews, including administrator accounts
-
2. Network security
The network decides what can talk to what, and keeps the rest apart.
- Firewall policies
- Intrusion prevention
- Network segmentation
- VPN and secure remote access
-
3. Cloud and applications
A cloud platform is as secure as its configuration. The defaults are a starting point.
- Security configuration reviews and hardening
- Private networking for workloads
- Encryption at rest and in transit
- Cloud logging and monitoring
-
4. Servers and workloads
Systems that are patched and locked down give an attacker less to work with.
- Operating system hardening
- Patch management
- Vulnerability assessments
- Controlled administrative access
- Identity. A user signs in. Identity controls such as multi-factor authentication and conditional access confirm who is asking.
- Network. Network controls allow that connection to the application it needs, and to nothing else.
- Application. The application reaches only the resources this user is authorized for, on workloads that are hardened and patched.
- Data. Data is encrypted in transit and at rest, and backed up so it can be recovered.
- Refuse. A request without valid access is refused at the first control it meets.
- Record. The refusal is logged so it can be reviewed. Layers reduce risk; no single control catches everything.
5. Data protection and recovery
A backup job that finishes is not proof that a system can be brought back. Recovery is planned around two numbers the business sets for each system, then tested.
- Backup schedules set from the RPO
- Off-site, access-controlled backups
- Critical system dependencies mapped
- Recovery priorities agreed in advance
- Restore tests on a schedule
- Documented recovery and failover procedures
A backup is not a recovery plan
- Last good backup
- Incident
- Service restored
- RPO Recovery point objective
- How much recent data the business can afford to lose, measured in time. It sets how often backups run.
- RTO Recovery time objective
- How quickly a system has to be working again after a disruption. It sets how recovery is built and tested.
This is security built into the foundation. For security assessments, risk management and compliance support, see Cybersecurity & Compliance.
How It Works
Planned in order, built without surprises.
-
Map what you have
We document your current setup (locations, network, servers, cloud services) and how it all connects.
-
Design the foundation
We design for where the business is going, then plan the order of work so nothing critical goes down.
-
Build and migrate
We install, configure and migrate in planned stages, with a rollback plan at each one.
-
Document and hand over
You get a clear record of what was built, how it fits together and who to call.
-
Run and improve
Ongoing management through Managed IT Services, or a clean handover to your own team.
Ways to Work With Us
Build it, move it, or keep it running.
Most clients start with one project. Some keep us on to look after what we built.
-
Implementation projects
Networks, cabling, servers and office setup, scoped and delivered as a defined project.
Suits you when you're building, moving or upgrading.
-
Cloud migration
An assessment of what should move, then a staged migration planned around how your business works.
Suits you when systems need to move without stopping the business.
-
Ongoing management
Your infrastructure monitored and maintained after it is built, as part of Managed IT Services.
Suits you when you want the foundation looked after, not just installed.
What Changes
Infrastructure you can build a business on.
-
A foundation you understand
Documented, so decisions are made on what you have instead of guesses.
-
Room to grow
Adding people, locations or systems doesn't mean starting over.
-
Fewer disruptions
Planned changes instead of emergency fixes.
-
Work from anywhere
The same systems and phones in the office, at home or on the road.
-
A plan for bad days
Backups and continuity planned before you need them.
-
Clear choices about what runs where
Each system runs where it makes sense: in the cloud, on site, or both.
Technology
The right technology for the environment.
We choose technology against your requirements, what you already run, how it has to be secured and operated, your budget and where the business is going. Not every business needs the same stack.
Technologies we support
- Cloud platforms
-
- Microsoft Azure
- Amazon Web Services (AWS)
- Google Cloud
- Communications and collaboration
-
- Microsoft 365
- Microsoft Teams Phone
Running something that is not listed? Tell us what you have. We start from your existing environment, not from a preferred product.
Illustrative Infrastructure Use Cases
What infrastructure engineering looks like in practice.
Four common situations and how we would approach each one. These are illustrative scenarios, not client case studies: every environment is assessed before a design is proposed.
- Illustrative scenario
Multi-location network modernization
Several offices, each with a network that grew independently. Connections between sites are unreliable, and nobody can see the whole picture.
How we would approach it
- Topology assessment
- Routing and switching redesign
- VLAN segmentation
- Site-to-site VPN
- Wireless optimization
- Redundant links
- Central monitoring
Aim Consistent connectivity between sites, a network you can see into, and room to add the next location.
- Illustrative scenario
Cloud migration and modernization
On-site servers are close to the end of their life, and adding capacity means buying more hardware.
How we would approach it
- Workload assessment
- Dependency mapping
- Cloud architecture
- Identity and network security
- Staged migration
- Monitoring
- Recovery planning
Aim Capacity that grows with the business, a clearer view of what is running, and less reliance on aging hardware.
- Illustrative scenario
Secure office infrastructure
A business is opening an office or moving to a new one, and everything has to work on the first morning.
How we would approach it
- Structured cabling
- Managed switches
- Wireless access points
- Firewall configuration
- Network segmentation
- Phones and conferencing
- Documentation
Aim An office that is ready on the first day, and a move that disrupts work as little as possible.
- Illustrative scenario
Infrastructure resilience
One internet line, one server and backups that have never been restored. A single failure would stop the business.
How we would approach it
- Risk assessment
- Redundant connectivity
- Backup modernization
- Failover planning
- Restore testing
Aim Fewer single points of failure, and a tested expectation of how long recovery takes.
Works Together With
The foundation for everything else.
Infrastructure is where your applications, data and security all live.
Questions
Technical questions, plain answers.
Which cloud platforms do you support?
We work with Amazon Web Services (AWS), Microsoft Azure and Google Cloud, in public, private and hybrid setups. We recommend a platform for each workload based on what you already run, how it has to be secured and operated, and your budget.
Can you work with our existing network and equipment?
Yes. Every engagement starts by mapping what you have. Where existing equipment is sound we design around it, and plan a refresh for the parts that are holding you back, instead of replacing everything.
Can you connect multiple offices and remote staff?
Yes. Multi-location design is part of network engineering: site-to-site VPN or SD-WAN between offices, secure remote access for staff, and the same segmentation rules at every site.
How do you approach cloud and network security?
As part of the design, not as an add-on. Identity and access come first, then network controls, secure configuration, hardened and patched workloads, and data that is protected and recoverable. Security assessments, risk management and compliance support are covered by our Cybersecurity & Compliance service.
How do you plan for outages?
We agree recovery targets for each important system: how much recent data you can afford to lose (RPO) and how quickly it has to be back (RTO). Backups, failover and redundant links are designed to meet those targets, then checked with restore tests.
No plan can guarantee recovery in every situation, which is why the tests matter.
Let's talk
Planning a move, a migration or an upgrade?
Tell us what's changing. We'll help you work out what your infrastructure needs to look like, and the order to get there.
